In the construction of the concept of granite fairly widespread. This material veneer façades, most often it is used in the public and representative buildings. This facade of resembles a wall, because it is attached large panels. Externally granite ceramic tiles similar to, Only very large. Location of insulation underneath is not particularly difficult.
Durability of granite depends on the correct assembly.
Characteristics of the facade of granite.
What is the difference this finish? External visual glamor of such material immediately attracts attention. The modern style and technological advantages is gaining popularity. Increasingly, granite is sold in the form of tiles.
This finishing material has the following properties:
— очень прочный, even more reliable concrete;
— повышенная устойчивость к высоким температурам, so often the sauna and public bath is granite veneer;
— повышенная жёсткость и износостойкость снижает подверженность плитки к деформированию;
— химические элементы, trapped on the surface of the material, practically do not damage it;
— имеет отличные показатели для применения во внешней среде, which is liable to attack.
The facade of granite does not fade in the sun, because it repels the sun's rays and neutralizes all the violations in the structure. Moisture resistance keramogranicheskih tiles helps not accumulate a electric discharges. There were suspicions, that natural stone can be released radioactivity, but, by measuring synthetic analogue, nothing of the sort found.
How to Install slabs of granite.
First the site preparation and analyzes covering the surface of the house. If there is a significant curvature of the walls, it is corrected. To do this, the walls are treated plaster of cement mortar or shpaklyuyut.
Installation is carried out in such a manner:
— подготавливаются, are marked and plumbing beacons, then they are done fixing profile and brackets;
— закладываются изоляционный и пароизоляционный слои;
— после делают крепление вертикального профиля;
— на этот профиль проводят установку плитки.
First you need to work on putting vertical beacons, they set the profile, necessarily at the same time equal to the building level or plumb, to comply with the verticality. Next, make a bookmark insulated material, most commonly used for this purpose rockwool. Sheets with a heater carefully fix.
Further, not sure if this is planned, by means of vapor barrier material, conduct sealing insulation boards. After that, make the installation of the vertical profiles to the brackets, leaving a small space between the lining material and insulate. Well, and then placed on top of the ceramic plate and themselves.
Если вы решили использовать вентилируемый фасад из керамогранита в качестве отделки здания — рекомендуем обратиться на http://pmkpanorama.ru/fasady.php