Concrete paving slabs are used for arranging street, and also near house paths, install it on a gravel base. Ideal as a covering material for terraces and other surfaces, intended for pedestrian traffic. This is a functional solution, and considering the low price, then it’s not a replaceable material at all. Read this article to the end., to get acquainted with the advantages of using concrete paving slabs from EOS.
Where can I buy?
You can buy paving concrete slabs from the EOS company by clicking on the following link: https://eos-klinkier.com.ua/catalog/trotuarnaya_betonnaya_bruschatka/, its models are distinguished by high functionality and spectacular appearance. Also, products from this manufacturer should be chosen if only because, that they are available in several dozen variants with different shapes, suitable for both industrial, and private objects.
In the EOS assortment you will find both traditional products, so are those, which, thanks to their impressive shape and color scheme, are ideal for modern projects. EOS concrete paving slabs owe their aesthetic appearance to high-quality materials, used for its manufacture. Each tile is resistant to harmful weather conditions. Which means, that you can be sure, that these products meet the highest requirements, which you can very precisely match to any situation.
Why should you choose paving concrete slabs from EOS??
This is the most popular product, from which sidewalks and platforms are built. It's very affordable, Besides, its installation is much faster, than, eg, in the case of classic paving stones. Although concrete tiles are thinner than paving stones, its strength is enough, even for the most crowded streets, intended for pedestrians. certainly, if you have a small budget, then you should choose EOS concrete paving slabs, because not only will you save, but also get an aesthetic product, matching the style of your yard. Buyers prefer EOS products for three reasons:
- affordable price;
- high quality;
- long service life.
Laying paving slabs
Concrete paving slabs are easier to install than other similar materials, After reading the brief guide below you are in this, certainly, make sure.
Required tools and materials
To lay a path made of paving concrete slabs, in addition to the material itself, you need:
- borders,
- sand and cement,
- whisk,
- shovel,
- rake,
- a broom,
- rubber hammer,
- cord,
- level, as well as a brush for sweeping sand.
Determination of territory for new coverage
The first step is to determine, length and width of the track. Along its entire length, it is necessary to drive in pegs several tens of centimeters high and connect them with rope.
Trenches for curbs
Then you need to dig a trench under the curbs on both sides of the path. They have depth 20 cm, Therefore, you should dig the ground to a depth 25 cm, taking into account the litter layer.
Laying borders
After adding bedding to the trench, borders should be laid, then they should be covered with bedding and lightly compacted. At the first rain, the water will penetrate deep and grab the bedding..
Application of the carrier layer
After installing the curbs, a layer of sand is applied between them, which is leveled using a rake. Then a layer of bedding should be applied on top of it., and you already need to smooth it out using a board, which has the width of the track (from curb to curb).
Laying paving slabs
Paving slabs are laid on the paved path, finishing each element with a rubber hammer. At the turn of the path you need to lay a special corner tile. The laid material should be covered with sand, which will fill all the cracks.
Output
certainly, affordable price, ease of installation, durability and aesthetic appearance indicate that, that you should give preference to paving concrete slabs from the EOS company.
