Facade materials

House facade decoration has a decisive influence on its appearance.. There are many opportunities. In addition to painting and plastering for the facade- you have many other materials to choose from, that will add a spectacular look to your home. Do not forget also about their practical side - a correctly selected facade material will favorably affect the durability of the facade..

fassadnie-materialy

The most popular and cheapest way to decorate a facade is to cover it with plaster or facade paint.. Walls are covered with one or up to three layers of cement-lime plaster, which is covered with facade paint on top. Also in the case of two-layer plaster- second layer- it can also be finished with traditional plasters.

More expensive, but you also get a more glamorous facade finish using brick and facade clinker, as well as clinker products, various types of facing stone and wood.

CLINKER - ELEGANCE AND DURABILITY
fassadnie-materialy-2

The prestigious finishing of the facade is provided by clinker, both in the form of bricks and in the form of tiles.. You can also find clinker elements, similar to stone. Unites their material, from which clinker materials are made. This is quality clay, coming from selected deposits.

The formed elements are fired at a very high temperature of approx.. 950 to 1100 °C. This production method makes the clinker a very weather-resistant material., has low water absorption- below 6%, thanks to which it is frost-resistant.

The clinker is also characterized by high resistance to mechanical damage.. The cladding facade is also easy to keep clean. That is why clinker elements are readily used for finishing plinths., corners and entrance areas. Clinker bricks are reproduced in a wide range of colors - outside the popular shade of brick red, available in brown and yellow shades.

In addition to full-fledged bricks, you can buy tiles imitating brick, which is cheaper, and can be used for wall decoration. For finishing 1m2 it will take about 52 bricks. Brick is used for finishing three-layer walls. They can also be used for the construction of one – or double-layer walls, but then a broader foundation will be needed. Therefore about the wall, finished with clinker bricks should be considered already at the project stage.

Cheap, as well as glamorous wall decoration can be obtained using facade tape and clinker products. They are much lighter and thinner than bricks., but for the layman they are indistinguishable on the facade. They can be used on any type of wall. Elements are very popular, filled with rich unusual structure – great fit, when you want to give your home a rustic character. Façade clinker stone has similar characteristics.. One pack of clinker covers an area of ​​about 0,8 m2.

STONE - PRESTIGE AND SUSTAINABILITY

Stone elements that were previously used as structural materials today perform the function of cladding the walls of facades. Most often they look like plates with a thickness 1,5-3 cm. Natural stone elements glued with resin are very popular.

Stone due to its high price and optical weight, as well as very high strength and resistance to atmospheric conditions- like rain, frost or ultraviolet radiation and mechanical damage, most often used for finishing the lower parts of the building - plinths, windowsills or corners.

Instead of natural stone, concrete elements are increasingly used to form an illusion.- resembling different types of stones, as a variety of colors and textures, and with typical stone finishing methods.

WOOD - NATURAL FOR LONG YEARS
fassadnie-materialy-3

Wood cladding belongs to the trendy finishing materials. Wood gives the facade a natural look, makes the house perfectly compatible with the environment, and modern methods of wood protection make it possible to turn this material into a very durable element of facade decoration.

Impregnations or stains and stains can not only protect wood from biological degradation, but also give it an interesting exotic wood color, eg- Tick. Pine and spruce wood is most often used on the facade., which are cheap and easy to handle and at the same time durable to load. The high resin content is responsible for their strength. Planks are laid on a lattice or planks.

In the video presented, you can contemplate the exciting process of making clinker facade materials.

Rate article
Add a comment