We choose glue based on the microclimate of the room and wall material

Need to mark, that at the stage of choosing a suitable coating, and adhesive composition it is important to take into account the microclimate of the room, where the repairs will be done and also the properties of the wallpaper material.

High humidity is often observed in the same kitchen or bathroom., and it is not recommended to glue single-layer wallpaper made of paper there, because soon they will look extremely unattractive. It is best to buy vinyl or fiberglass wallpaper for these rooms.. The most important thing here is, so that the adhesive used is resistant to the negative effects of steam and maintains the adhesion of the cladding and wall surfaces at the proper level. The most suitable according to the parameters described above is a special adhesive mixture for glass wallpaper. Vinyl glue also shows itself well here - its just applied layer has the property of sliding - for some time you can correct the position of the glued piece of wallpaper without tearing it off the wall.

On the issue of dampness in the premises. Because of it, a fungus can begin to multiply under the wallpaper., mold and harmful bacteria. For this reason, manufacturers of wallpaper glue add antiseptics and fungicidal components to their products., that prevent the spread of microorganisms. What is it, as not an argument in favor of using glue for fiberglass and vinyl wallpaper in elevations with high humidity. In general, walls in the bathroom or in the kitchen can be pasted over with non-woven wallpaper., because it is easy to choose the right glue here. It's sad here then, that the wallpaper itself does not tolerate water exposure, they cannot be washed periodically with water, and you can't do without it in cleaning wet rooms.

If the room being repaired maintains normal temperature and humidity, can be used, basically, any type of wallpaper. Respectively, the choice of glue is greatly simplified. The main thing here is to pay attention to the compatibility of the selected mixture with the composition of the glued surface..

When summing up, it should be noted, that the choice of wallpaper glue is a matter, at all, simple. All you need to do is take into account a number of factors., forming the right decision:

  1. Selected type of wallpaper for renovation.
  2. Room temperature and humidity, where is the renovation planned.
  3. Chemical and physical properties of the glued surface.
  4. Buying budget - and glue, and wallpaper.
  5. The richness of the available assortment in stores in a particular locality.

If we consider directly the composition of adhesive mixtures, then, according to the information from the packaging, you need to accurately learn their purpose. What material can be used? For heavy or light wallpaper, you need it? What types of glued surfaces are suitable?

If the adhesive was chosen correctly, as a result, no stains are expected, no blisters, the coating will hold firmly at least 5 years old!

Rate article
Add a comment